Specifications
Material for Stub Axles: 1045 medium tensile steel to AS1442 standard.
Measurement of stud patterns.
| 1500KG BEARING & SEAL SPECS |
| BEARING KIT PART # TPT1184 |
BEARING NUMBERS
|
BEARING DIMENSIONS |
SEAL KIT PART # TPT10131 |
| DESCRIPTION |
SEAL DIMENSIONS |
| CUP |
LM67010 |
58MM "OD" |
INNER
|
59mm "OD" |
| CONE |
LM67048 |
32MM "ID" |
| CUP |
LM11910 |
45MM "OD" |
OUTER |
37MM "ID" |
| CONE |
LM11949 |
19MM "ID" |
| Part No: |
Studs: |
PCD diameter: |
Stud width: |
Flange diameter: |
'x' in mm: |
| T122005 |
Blank |
|
|
155mm |
|
| T122008 |
4 |
100mm |
7/16 inch |
155mm |
100.00mm |
| T122010 |
4 |
4 inch |
7/16 inch |
140mm |
101.6mm |
| T122015 |
4 |
4 1/4 inch |
7/16 inch |
160mm |
108.0mm |
| T122018 |
4 |
110mm |
7/16 inch |
160mm |
110.0mm |
| T122020 |
4 |
4 1/2 inch |
7/16 inch |
160mm |
114.3mm |
| T122025 |
5 |
4/14 inch |
7/16 inch |
160mm |
63.449mm |
| T122035 |
5 |
4 1/2 inch |
1/2 inch |
160mm |
67.183mm |
| T122040 |
5 |
120mm |
7/16 inch |
160mm |
70.535mm |
| T122045 |
5 |
5 inch |
7/16 inch |
160mm |
74.650mm |
| T123055 |
6 |
5 1/2 inch |
1/2 inch |
190mm |
139.7mm
|
- The Flange Diameter is the outside diameter measurement of the hub face that the wheel is fitted.
- Our range of non braked hub kits come with a 38mm diameter stub axle which can be welded to your axle tube
- Thes Hubs have a 1500KG GVM (Gross Vehicle Mass) load rating which is based on a single axle and a pair of hubs.
- Our range of hubs come in a wide variety of wheel stud patterns to suit the most common wheel sizes.
- The most common stud pattern is 5 stud with a PCD measurement of 4 1/2 inch and fits our most commonly stocked rims and tyres.
- This range of hubs are not able to fitted with a bolt on disc rotor.