Important
This part is made to order, with a 6-8 week lead time. Please download and fill out the axle order sheet upon ordering. Hub equipment is to be ordered seperately.
When Electric drum brakes are fitted to 3000kg Duratorques the stopping capacity is 2000kg.
General Information
Duratorque is a superior suspension system that is suitable for fitment to and use on all types of trailers. Using specially formulated rubber cords as a springing medium, Duratorques are totally self-contained and easily fitted to the trailer chassis. Because the two sides are not connected, each wheel is independently sprung.
All Duratorque components are either galvanised or electro zinc plated for protection against corrosion.
Carrying capacities for duratorques are 1000kg, 1500kg, 1750kg to 2200kg in both two piece and full beam types and 3000kg version in full and drop beam. These capacities are for single axle applications. When mounted in tandem the capacity must be reduced by 25% i.e. two 1500kg full beam duratorques will carry 2250kg. Note that duratorque half axles are each labeled with the total capacity per pair, not each side.
All duratorques are able to be fitted with non braked or braked hubs. These brakes can be hydraulic disc, 1500kg, 1750kg, 2200kg & 3000kg capacities.
Electric drum braked Duratorques are available in 1750kg and 2200kg capacities.
Available as two piece units which will fit any chassis width and are available as ex-stock or full beam which are manufactured to the customers specifications.
Full beams are also available in a gull wing form for fitment to boat trailers allowing the boat to sit lower on the trailer.
It is recommended that Duratorques be mounted to the trailer with the swing arms trailing. When mounted in tandem the distance between the tyres be kept to a minimum and should not exceed 150mm. The distance between the top of the tyres and the mudguards when the Duratorques are new and unloaded should be at least 120mm. When mounted in tandem the front axle should be braked.
SINGLE AXLE OR TANDEM
If tandem then the carrying capacity of each Duratorque is to be reduced by 25%.
When ordering full beam Duratorques remember to supply your required length measurement C & B as shown in the diagram below.
Straight Beam Type Duratorques
| Part No: |
Capacity: |
Hub Type: |
| T101046 |
1000kg - 1500kg (Select capacity) |
Non braked & disc braked |
| T101055 |
1750kg |
Non braked & disc braked |
| T101051 |
1750kg |
Electric drum braked |
| T101052 |
2200kg |
Non braked hubs & disc braked |
| T101068 |
3000kg |
Non braked, disc & electric braked |