Best used with DRUM BRAKES (Over 8,000lbs Axle Capacity)
Features:
- This device has an in-built compatibility adapter, so no external compatibility device is necessary.
- High-powered DC motor and quality pump with minimal moving parts.
- Weatherproof, anodized alloy case protects components
from external elements (such as saltwater, extreme temperatures, and
poor road conditions).
- Anodized, T6-grade extruded alloy housing protects from different environments and has a great aesthetic design.
- Independently sealed fluid tank.
- Conformal coating on the circuit board is designed to provide extra protection from moisture.
- Two-year no-hassle warranty.
Specs:
- DOT Compliant
- Trailer Mounted
- Application: Drum brakes for single, tandem, and tri-axle trailers
- Distance between mounting holes: 278mm & 35mm (10.95” & 1.38”)
- Mounting Hole Diameter 12 x 8 mm (1.2cm x 0.8cm) slot
- Hydraulic Port Size: 3/16 inverted flare (standard brake line fitting)
- Dot 4 Brake Fluid
- Fluid Capacity of 15.7 oz
- Power: 12V DC (min 30 amp feed)
- Max Current Draw at full pressure approximately 18-24 amps.
- Wire Configuration:
- Black: 12-volt power
- Blue: brake controller
- Yellow: breakaway
- White: ground
- Wire Gauge Recommendation
- A minimum of 10 gauge on black and white
- A minimum 12 gauge on blue and yellow
- Dimensions:
- Length: 255mm (10”)
- Height: 152mm (6”)
- Width: 90mm Base / 44mm Top (3.6” Base /1.7” Top)
- Mounting centres: 275mm L and 40mm W (10.9” and 1.6”)